Readme for Firmware Firmware file: 199925213520-41_3.7.0.sqrfw Applies to Siqura models: Tunnelcam Ultimo Dual Tunnelcam Ultimo Multicam Ultimate XCU Fusion XCU Compact TrafficPTZ Ultimo V2 Version information: Firmware version 3.7.0 Revisions: 3.7.0 (Date 2021-03-18) FIX: Web app: Move the Highlight mask from exposure to Enhancement tab FIX: Sony 30x zoom block Manual Focus issue FIX: Firmware update fails under load (and reverts to factory image) FIX: UP36: Increase the Pan, Tilt and zoom speed when the camera is zoomed in FIX: CPU load parameter get stuck at 100% FIX: UP36: Fix incorrect Focus normalization for zoom block FIX: The shutter mode/setting is lost after reboot. XCU with new 10x zoom block CHG: Buildserver should use FUG_rules from BitBucket CHG: FIX the version number not updating on incremental build 3.6.1 (Date 2021-01-04) FIX: Duplicate transmitter ports on RTP/UDP 3.6.0 (Date 2020-11-06) ADD: Support rail event (selected models) ADD: Support on-board IEPE adapter (selected models) CHG: Updated libTDL to V2.02 3.5.2 (Date 2020-10-13) FIX: Multiple authentication requests after enabling user authentication. FIX: Do not feed the TDL with frames when framerate is unknown (0 fps divide by zero in TDL). ADD: Show an invalid PID configuration is set in OSD. CHG: Version numbers are generated through `git describe` instead of `0.0.0` for better tracability. CHG: Web app shows a loading indicator when loading/authenticating. CHG: Web app correctly logo padding. 3.5.0 (Date 2020-06-03) ADD: Potential vulnerability for ClickJacking ADD: support for new 36x zoom block CHG: Add possibility to disable SNMP CHG: Add 24-bits support for audio level meter CHG: Add true RMS mode for audio level meter CHG: NTCIP: globalTime setter/getter CHG: Heater can't be turned on when powered by POE Improvement FIX: VCA: Unusable color palettes in Hotspot Monitor FIX: VCA: Palettes are not shown correctly FIX: Warped image when streaming QCIF or QVGA with 5:4 aspect ratio FIX: Add compass function to TPU/BC840v2/UP30/UP36 FIX: PID does not work correctly on TAU2-cores with 336 resolution FIX: Race in calling GenetecParameterManager::CheckDataBaseContent FIX: Combine 2 ADCs on xcu 3.4.0 (Date 2020-02-06) ADD: PID: Extend VCA event processing so all VCA-events are translated to external Siqura events (SPI and Onvif) ADD: Add Genetec discovery protocol ADD: Add MAPI parameters to the HotSpot feauture to read-out the measured Temperature in a ROI ADD: TPU (UPxx/BC840v2) Add an extention to the TPU driver for D/N mode and zoom ration ADD: Software support for updated 4x and 10x (M1) zoom blocks in XCU cameras (ready for frontend-testing) ADD: Software support for new zoom blocks in XCU cameras (ready for frontend-testing) ADD: Show out of date message web browser FIX: Webapp: "Image Settings" page and "Thermal Settings" page only visible after a page-reload after logging in FIX: Sometimes corrupted initial settingsfile for 802.1x cause a lot of logging FIX: 4x zoom actual zoom position lost after factory default FIX: Logfile full with 'LLDP allocated power: 20700mW', 'LLDP allocated power: 0mW', etc... FIX: Zoom position changed after firmware upgrade to 3.1.3 or above FIX: Camera focus and zoom position slightly repositioned after reboot 3.3.8 (Date 2020-01-23) FIX: Logfile full with 'LLDP allocated power: 20700mW', 'LLDP allocated power: 0mW', etc... FIX: Zoom position changed after firmware upgrade to 3.1.3 or above FIX: Camera focus and zoom position slightly repositioned after reboot 3.3.7 (Date 2019-12-06) FIX: Incorrect pre/post time when video is requested with too large pre-recording time FIX: Downloaded AVI clips sometimes too short FIX: XCU firmware does not start up on Thermal only units (bug introduced in 3.3.6) 3.3.6 (Date 2019-11-11) FIX: after factory default, actual zoom position lost on the 4x zoom FIX: TrafficPTZ-V2: IR-lamp and IR-cut filter are not connected 3.3.5 (Date 2019-10-28) CHG: Additional hardware models supported FIX: Manual focus move is too fast with new 30x zoom block 3.3.4 (Date 2019-10-02) FIX: SVW picture freezes when second display connects to same camera FIX: Bitrate can be set to extremely high values by setting "Maximum bit rate" to 0 FIX: ONVIF SetVideoEncoderConfiguration gives error message 3.3.3 (Date 2019-09-04) FIX: Periodic reboot caused by the fix for FW-887 in release 3.3.2 3.3.2 (Date 2019-08-26) FIX: Heater not working (no POE+ detected) on switches with only LLDP POE+ handshaking 3.3.1 (Date 2019-08-09) FIX: Camera unreachable when setting empty Admin password FIX: Password field cleared in browser authentication window each 5 seconds after changing Admin password 3.3.0 (Date 2019-08-05) ADD: ONVIF: possibility to set FrameRateLimit to any value between 1..25/30 fps ADD: Webapp: Telnet- and FTP enable/disable on webapp and global warning when Telnet and FTP enabled ADD: new optional queries "?transportmode=unicast" or "?transportmode=multicast" options to the RTSP-URI ADD: Extra logging when firmware upgrade is started ADD: Add current IP as "alternate name" in certificate CHG: HTTPS: change self-signed certificate to infinite (100 years) FIX: NTP client rejects stratum level 16 servers FIX: HTTPS: new certificate each time the camera is rebooted FIX: Webapp: privacy masks can not properly be edited anymore FIX: Wrong zoom position reported for 10x zoomblock FIX: 4x zoomblock: frontend sometimes not responding FIX: Contact closure outputs 5-8 available in web app FIX: Settings file lost on brief power interruptions FIX: ONVIF: reboot when trying to go to, delete or update an existing PTZ-preset FIX: MulticastTransmitterAlwaysOn does not always work FIX: Output-only contact closures not visible in webapp FIX: SPI API: PTZ GotoAbsoluteZoomPosition does not accept negative pan values 3.2.0 (Date 2019-04-18) ADD: Cyber Security Enhancements CHG: Security: block access on X wrong credentials ADD: Notification when NTP server is offline ADD: Logging when ethernet network link disconnects CHG: addition of the Genetec SET_PARAMETER-KeyFrameRequestMethod CHG: Confusing SD-card log message after firmware upgrade FIX: ONVIF sets same multicast address+port for Direct streaming and RTSP FIX: NTCIP: Iris/Focus control not correctly implemented 3.1.0 (Date 2019-01-08) FIX: SPI: SDCardStatus custom event is not triggered FIX: NAS traffic shaping affects RTSP-stream FIX: ONVIF: Pass the conformance test on Testtool v18.06 SR1 FIX: No output frames during FFC of thermal frontend (causes stream lost message in Sense) FIX: Analog video output on XCU FIX: Aux1..Aux8 control via ONVIF FIX: ONVIF: GetVideoEncoderConfigurationOptions returns corrupt ResolutionsAvailable-list FIX: Card insertions/removals are not logged FIX: Umlauts in camera name not displayed in OSD FIX: Crash upon startup when SNMP Authentication trap is enabled ADD: Warning when user sets authentication for viewing when no users are defined ADD: "Sensor calibrating..." OSD text during thermal sensor FFC-cycle 3.0.1 (Date 2018-12-12) ADD: Contact outputs 5-8 are available to the user 3.0.0 (Date 2018-11-15) FIX issue: firmware upgrade can brick device IMPORTANT NOTICE: Due to the nature of this fix, you CANNOT DOWNGRADE back to v2.x. If, for some reason, a downgrade to a specific version is needed, please contact your Siqura support team. The major version number is increased to indicate this downgrade limitation. This v3.0.0 release is based on the last v2.x release (v2.21.0). Beside this important single fix, there are no changes as compared to the last v2.x release. 2.21.0 (Date 2018-10-18) (Unreleased, contains dedicated changes for AID-products only) 2.20.0 (Date 2018-10-01) FIX: BC840v2 + TrafficPTZ: Autofocus not activated when PTZ, Abs. Pos. or Preset Pos. is done via ONVIF FIX: Activating usermanagement gives an incomplete webgui until refreshed FIX: Webapp is more or less useless when user management is activated FIX: PTZ-camera in manual focus mode does not always jump back to auto-focus when panning/tilting on the webapp FIX: VCA: blob timestamps are incorrect FIX: PID: Blob trigger point bottom-center has unexpected behavior FIX: Reset Password doesn´t work FIX: Webapp browser autocomplete adding new user making it unusable. FIX: NAS: ClipManager-instances are not cleaned up after changing storage configuration FIX: NAS: support for large NAS-devices (> 4 TB) FIX: RTSP: Missing CSeq in 401 Unauthorized response CHG: Added many features to ONVIF recording control, search and replay FIX: No bidirectional PTZ-drivers available in s60e-v2 product 2.19.0 (Date 2018-09-12) ADD: ALPR (Automatic License Plate Recognition) for supported XCU-based products 2.18.0 (Date 2018-08-09) FIX: Bug in image.cgi: crash when only width is specified FIX: tilt range Ulisse2 PTZ-driver identical to Pelco-D_bidir driver ADD: BC840v2 in Ulisse 2: PTZ Privacy Masks just like in the TrafficPTZ ADD: NAS-recording ADD: FenceGuard: XCU camera with PID ADD: XCU with analog thermal video output CHG: 24-bit audio: Make 24-bit audio profile the default profile when 24-bit is enabled (TTP #1997) CHG: Logging improvement to be able to see which 'TcpConSrvCon'-task is 'hanging' 2.16.2 (Date 2018-06-18) FIX: Extended WDR parameters for standard 4x and 10x optical zoom blocks 2.16.1 (Date 2018-06-08) FIX: Recording button on live view page does not work FIX: Recording started with record-button on live view page can not be stopped on channel 2, 3 and 4 2.16.0 (Date 2018-06-31) FIX: NTCIP systemCameraFeatureStatus response is not correct 2.15.0 (Date 2018-05-15) ADD: support for additional front ends CHG: added security provision 2.14.0 (Date 2018-04-25, applies to XCU only) ADD: Headlight blooming and WDR mode selection on Sony 10x zoom block ADD: support for additional 4x zoom front end ADD: support for the "XCU Compact" hardware (no data, no CC, no audio) CHG: MCU: isotherm color palette name changes CHG: Firmware rename to XCU... CHG: added security provision FIX: Recorded video clips too short FIX: Backup and restore: Keep network settings option does not work FIX: Settings local/UTC time results in one hour offset FIX: Masks on PTZ privacy mask webpage don't flip if horizontal mirror is enabled for camera FIX: Wrong productdata causes boot failure FIX: Fix edge recording timestamps not properly stored 2.13.0 (Date 2018-03-16) ADD: PTZ Privacy Masks ADD: Actual preset returned in Data-1.Ptz-1.ActualPreset parameter FIX: crash when Edge Recording API queries were made for a not existing input FIX: ONVIF http:///topicns.xml could not be retrieved FIX: NTCIP relative pan and tilt do not work (TrafficPTZ) FIX: SPI PTZ group sometimes Ptz, sometimes PTZ; must always be PTZ FIX: Long term bitrate can be enabled after upgrade while not visible on webpage anymore FIX: No image on thermal only cameras with low resolution 336-pixel thermal core (broken since 2.12.0) 2.12.1 (Date 2018-02-01) FIX: Rolling and stuttering images on cameras with a standard 10x front end, when a red light source is visible on the right edge of the image 2.12.0 (Date 2018-01-25) FIX: ONVIF compliancy with Testtool 17.12 CHG: Webapp PTZ-control improvements: buttons for more precise control, and zoom with scroll wheel CHG: Images from thermal sensors with 336x256 resolution upscaled to 640x512 to improve OSD-text resolution ADD: Preliminary support for 8-bits NAND flash 2.11.0 (Date 2018-01-12) FIX: settings lost after downgrade from 2.9.0 FIX: Separate color palette for isotherm mode (products with thermal sensor only) FIX: Not possible to add a node with MSIE11 FIX: movement artifacts visible on S-60 D-MC when using H.264 S-60 D encoding profile FIX: SPI always reported support for PTZ-patterns (also when not supported) ADD: 24-bit audio possibility (on selected product) ADD: PTZ-drivers for COHU (codecs only) ADD: Dedicated RTSP URI for video without audio (e.g. rtsp:///VideoOnly-1.Encoder-1) ADD: 16 Privacy Masks for TCU and MCU 2.9.0 (Date 2017-10-31) ADD: added Manual focus feature (and "push to focus" feature) ADD: added support for audio input and output ADD: added support for events on digital I/Os ADD: added support for Contact Closures 2.7.2 (Date 2017-09-18) FIX: Misconfigured trafficshaping with 2 multicast streams to the same destination port 2.7.0 (Date 2017-08-24) ADD: Heater control 2.6.1 (Date 2017-09-18) FIX: ONVIF absolute pan/tilt readout was incorrect FIX: Misconfigured trafficshaping with 2 multicast streams to the same destination port 2.6.0 (Date 2017-07-21) CHG: Increased the TCP-streaming buffer size CHG: OpenSSL upgraded to 1.0.2l FIX: Recording fails at some moment in webapp FIX: Fixed 2CIF resolution from 720x288 and 720x240 to 704x288 and 704x240 FIX: The Hue cannot be set using the SPI FIX: I/O outputpin does not stay closed when closed via SPI FIX: Fixed gsoap vulnerability with buffer overflow bug @ 2GB. FIX: Improved TCP-streaming behaviour in case of network connection problems FIX: Fixed Color Saturation setting on the webapp FIX: Fixed French translations 2.4.1 (Date 2017-06-29) FIX: Absolute PTZ position readout and set using Genetec Security Center 2.4.0 (Date 2017-06-07) CHG: Special SPI preset- and aux- commands to control washer, wiper and IR-lamp CHG: Wiper timeout increased from 5 seconds to 10 seconds CHG: ONVIF generic coordinate space tilt changed to -40..+90 degrees 2.1.2 (Date 2017-03-27) FIX: fixes the 'blurred image with sunlight' problem CHG: Fixed German and French translations for parameter Minimum shutter time 2.1.2.int20170322 (Date 2017-03-22) CHG: Adding minimum shutter time parameter with correct default. This fixes the 'blurred image with sunlight' problem 2.1.1 (Date 2017-03-06) CHG: Embedded help is updated to latest version. CHG: Pressing enter in direct streaming page no longer resuls in SDP download. FIX: disabling auto image enhancement resulted in very dark image. FIX: no longer an igmp join is send when onvif discovery is disabled. FIX: german translations are updated. FIX: favicon.ico is updated to rebrand. FIX: translation error when no privacy mask was created. FIX: RTSP multicast address could not be changed in IE11. FIX: french translations are updated. FIX: privacy masks could not be edited. FIX: ConnectionLoss event on SPI not fired for Connection monitor. 2.1.0 (Date 2017-02-01) CHG: Various small web app changes/fixes CHG: Various SPI additions CHG: Added aspect ratio setting CHG: Added PTZ enable checkbox (disable/enable PTZ on the web page, ONVIF, SPI and MAPI) CHG: Edge recording is now file based on SD-card (SD card need to be formatted after upgrade) CHG: Edge recording can be triggered with all event types (not just connection monitor) CHG: Edge recording continuous recording mode possibility CHG: ONVIF profile G (recording) partially implemented (not fully compliant) CHG: Various small changes/fixes for NTCP ADD: Support for the following new Genetec parameters: Network.Hostname Network.Services.Http.HttpsSupported Network.Services.Ntp.ServerAddress Network.Services.Ntp.PollInterval VideoInput.Capabilities.Rotation VideoInput.Capabilities.TamperingSupported VideoInput..Rotation VideoInput....Capabilities.BitRateModeSupported VideoInput..mjpeg..BitRateModePriority VideoInput..h264..Capabilities.SupportedProfiles VideoInput..h264..Profile VideoInput..h264..ImageQuality AudioInput..Capabilities.CodecList General.Capabilities.PrivacyMasksSupported PTZ.1.Capabilities.PresetNumber PTZ.1.Capabilities.AuxNumber ADD: Support for the following new Genetec ptz.cgi commands: ClearPattern GetPTZPosition GotoAbsolutePosition GotoRelativePosition CHG: Internal LED's on TrafficPtz and Tunnelcam disabled ADD: Support for network SFP mode FIX: ONVIF absolute PTZ read/write had incorrect sign, read also invalid range