BC840-MC readme.txt
(C) TKH security

===============================================================================
BC840-MC(-SFP) product codes 599405971972, 599405971012, 

===============================================================================

4.24.1 2022-08-23
NOTE: This release is only compatible with the following products:
	- BC840-MC-NA 		599405966432
	- BC840-MC-SFP-NA	599405966422
	- BC840-PID-XT-NA	599405966412
	- BC840-PID-XT-SFP-NA	599405966402
	SW Article code: 199925213680 (BC840-MC-IMX327-NA); 199925213690 (BC840-PID-IMX327-NA)

	Fixed:
		FW-1573 4:3 aspect ratio for units based on imx327 and frame rate for PAL and NTSC systems

------------------------------------------------------------------------------

4.24.0	Date 2022-03-28
NOTE: This release is only compatible with the following products:
	- BC840-MC-NA 		599405966432
	- BC840-MC-SFP-NA	599405966422
	- BC840-PID-XT-NA	599405966412
	- BC840-PID-XT-SFP-NA	599405966402
	SW Article code: 199925213680 (BC840-MC-IMX327-NA); 199925213690 (BC840-PID-IMX327-NA)
	
	Added:
		FW-1451 FW for the BC840 (IMX327) without audio
	
		
------------------------------------------------------------------------------

4.23.3  Date 2021-11-11
	NOTE: 4.23.x is only compatible with the BC840 products with an product code ending on "...2"
	BC840-MC(-SFP) product codes 599405971972 and 599405971012
	SW Article code: 199925213650 (BC840-MC-IMX327); 199925213660 (BC840-PID-IMX327)
	Fixed:
		FW-1457: Fix Over-exposed image and loss of image profiles in v4.23.2 (AID)

------------------------------------------------------------------------------

4.23.2  Date 2021-09-30
	NOTE: 4.23.x is only compatible with the BC840 products with an product code ending on "...2"
	BC840-MC(-SFP) product codes 599405971972 and 599405971012
	SW Article code: 199925213650 (BC840-MC-IMX327); 199925213660 (BC840-PID-IMX327)
	Fixed:
		FW-1235	AID - Empty configuration after reboot
		FW-1223	CPU load parameter get stuck at 100%
		FW-1433	Fix the default setting for the white balance. This has to be set to "auto" by default.

------------------------------------------------------------------------------

4.23.0 (Date 2021-01-19)
	NOTE: 4.23.x is only compatible with the BC840 products with an product code ending on "...2"
	BC840-MC(-SFP) product codes 599405971972 and 599405971012
	SW Article code: 199925213650 (BC840-MC-IMX327); 199925213660 (BC840-PID-IMX327)	

	Added:
		Initial release BC840-MC(-SFP) with new IMX327 sensor. 


------------------------------------------------------------------------------

4.22.10 Date 2021-09-30
	NOTE: This version does not support the new BC840 products with an product code ending on "...2"	
	BC840-MC(-SFP) product codes 599405971972 and 599405971012
	SW Article code: 199925213390 (BC840-MC)

	Fixed:
		FW-1235	AID - Empty configuration after reboot
		FW-1223	CPU load parameter get stuck at 100%

===============================================================================

===============================================================================

4.22.9 (Date 2020-05-28)
FIX: Random reboots when a lot of MAPI calls are made (Siemens Mantis 1836) (memory fragmentation)
FIX: ONVIF: send failure of first event after 3 minutes of no events
ADD: Software-debounce on CC-inputs (embedded)
ADD: Potential vulnerability for ClickJacking (embedded)
ADD: PID extend VCA event processing so all VCA-events are translated to external Siqura events (SPI and Onvif)
ADD: Add possibility to disable SNMP (embedded)

4.22.8 (Date 2019-10-23)
ADD: Addition of COHU i-Series PTZ-protocol drivers
CHG: Settings changes are now logged in log file
CHG: FW-711 ONVIF event integration (wsa/wsa5) for FLIR/DVTel Latitude VMS
FIX: NTCIP systemCameraFeatureStatus response not correct
FIX: ONVIF GetVideoEncoderConfigurationOptions without tokens returned a wrong resolution list
FIX: More ONVIF event fixes back ported